This machine uses a touch screen, PLC, and stepper motor to drive the specimen holder to move to complete the cutting stroke. The cutting thickness is controlled by a stepper motor driving the sample holder to move up and down.
With the PLC at your end; the thickness, slice times, length, and speed can be set arbitrarily on the touch screen. The cutting thickness can be directly entered on the touch screen to the required thickness in mm. This machine performs both stripping and slicing.
XLPE/ HT/ HDPE cables
25 mm
145 mm
Longitudinal: 145 mm
0.1-2mm
Fully Automatic
Yes
180 mm
Thickness 0.7 X Width 25 X Length 125mm single cutting edge
For vertical: 3 jaw chucks; for horizontal: flat piers, 10 pieces of blade, extended jaws
0～40cm/min adjustable
high-speed steel
1000 x 510 x 1100 mm
1.5KW
280 kg
Advance software base Cable Slicer
Horizontal & vertical sliding system servo motor screw
Touch screen control panel
Multiple sections in one command
Longitudinal slices for making dumbbells
High speed steel blade
Unlock new possibilities, get detailed insights, or connect with our specialists
+91 82229 29966
